Innokin Sensis Replacement Pod & Coil

Product Information

The Innokin Kroma-Z comes with two different coils, and two different airflow rings, which means, along with the two different airflow rings, there are multiple ways you can vape on this thing.

Again quite typically, the Innokin Sensis pod fills up from the bottom, with a rubber/silicon plug. The truth is, I’ve actually had the Kroma-Z quite a while – in early January, after using it for a week or so, I couldn’t find it! The Innokin Sensis’ Coil+ mode ‘primes’ the coil at the end of each puff by running for an extra 0.4s after your puff at 40% of your selected power. Secondly, the fill port for the liquid is at the bottom, which is inconvenient and makes the pod more prone to leaking and condensation. The Pod Mod AirflowIt has a build in 3,000mAh battery, a screen that you can change the layout of and adjustable airflow.

Generally the Sensis EZ ends up being such a good all-rounder for lower powered vaping but without sacrificing flavour and warmth, naturally vapour production is lower but for me that’s a huge pro for indoor vaping and vaping in public. The other benefit is the 3000mAh battery life which is excellent and would last me a full day and evening with the 0.65ohm coil. All views and opinions are solely those of my own and do not necessarily reflect the opinion of others. Inside the Box I almost forgot, apparently Innokin suggest the higher the wattage you are using the higher the hertz you should use, (MTL is recommended at 50-100hz). Innokin Sensis – Battery and Charging At the top if a 510 fitment and the Innokin Kroma-Z comes with a nice array of drip-tips which are designed for DTL, RDL or MTL so you have every option you could want. Nicely done. The Innokin Sensis is a highly innovative creation that is sure to catch a lot of heads. It produces quality clouds and vapor thanks to its advanced features, and its coils and airflow can accommodate a wide range of vaping styles.While the airflow is fully open, it is surprisingly loose for a 40w system. It’s not restriction free but it isn’t far off. When it comes selecting an e-liquid, we recommend either a 50/50 or high PG e-liquid with the 0.65 Ohm Sceptre coil. The 0.25 Ohm Sceptre S coils will produce a larger amount of vapour for RDTL vaping and work best with either 60% VG or some 70% VG e-liquids. Refilling is very simple thanks to the bottom fill seal and the tank section will hold up to 2ml of e-liquid, while the seal system stops leaks from occurring.

If you aren’t familiar with Variable Voltage, it’s as simple as wattage but less fine-tuned, always start low and work your way up though. Call me undeserving/ungrateful, but the whole FIND F0 thing wasn’t a game-changer for me.It’s a nice featurebut being honest, I could live without it.The default frequencies in the mod before you enable F0 are absolutely fine and handle both coils well, I guess it’s somewhere in the middle, as much as I enjoyed playing around with it.The Sensis at default was more than capable of providing a superb vape without the option. drip-tip compatible and inside the kit you get 3 drip-tips. In my opinion two for MTL and one for DTL. Very nice to receive 3 drip-tips in the kit. Who is it for? MTL all the way, As a Direct To Lunger, it is very limited to what it can do for you, but as a MTL that doesn’t need a super restrictive draw, it’s a pretty damn good device. With the DTL 0.3ohm coil at 35W you get around 290 puffs and with the MTL 0.8ohm coil I get 565 puffs out of one charge. That is a lot of puffs for MTL, one charge enough for 2-3 days of vaping.For me simply the best pod-mod if its about MTL. Z-coils are as always reliable, and the airflow can be set to very tight which for me is one of the most important things for an MTL vape. DL wise, using the new S Coil at 35 watts is where the F0 function appeared more evident.I went as low as 25Hz for this one, not only did it make the draw silky smooth, it also appeared to boost the flavour from this coil a little.I’m pretty sure it was not in my head as Innokin sent me twokits, one I kept as standard and the other I had the F0 function enabled so I could test side by side. The pods house Innokin’s Push-Fit Z-Coils and included, as already mentioned, the two airflow rings.